DIN EN Cold Drawn and BA Seamless Tube (Total 176 Products)

Cold Drawn Seamless Hydraulic Tubing

1. Low Carbon Steel Material
2. for use as hydraulic lines and requiring tubing of a quality suitable for flaring and

2013-12-18

DIN1629 St37 NBK Cold Drawn Seamless Tube

DIN1629

1.DIN1629 St37 NBK Cold Drawn Seamless Tube
2. tolerance on OD&ID:+/-0.05mm,
3.100% eddy current test
4. BA Surface, or Zinc coated or phosphated

2013-12-18

Bright Annealed Seamless steel tubes

1.EN10305-4
2.E255,E355,E235
3.BK,NBK,BKS,GBK
4.Ra<1.0u, tolerance on OD+/-0.5
Bright Annealed Seamless steel tube

2013-12-17

bright annealing steel tubes

1.st45 bright annealing steel tubes
2.WT:0.5-9mm OD:4-80mm
3.Precision (+/-0.05mm On OD and ID)
4.Suface:Ra<1um

2013-12-17

High Pressure Oil Piping for Hydraulic

Carbon High Pressure Oil Piping for Hydraulics
Carbon Steel St37.4 or St52.4 Material
non-oxidition heat treatment
clean ID

2013-12-17

Cold Drawn Seamless steel Tubing

1.100%ET test
2.in full compliance with DIN2391-2
3.Typical length available 6m
CFS NBK Cold Drawn Seamless Hydraulic Tube

2013-12-17

steel tube for Construction Machine Vehicle

1.EN10305-4
2.E255,E355,E235
3.BK,NBK,BKS,GBK
4.Ra<1.0u, tolerance on OD+/-0.5
steel tube for Construction Machine Vehicles

2013-12-17

seamless carbon steel tubes

1.seamless carbon steel tube
2.WT:0.5-9mm OD:4-80mm
3.Precision (+/-0.05mm On OD and ID)
4.Suface (Ra<1.0um)

2013-12-17

Seamless Cold Drawn Small Diameter Tube

Seamless Cold Drawn Small Diameter Tube
1.OD3mm, WT0.5mm
2.ID flushed by high pressue oil gun
3.non-oxidition heat treatment

2013-12-17

Precision Cold Drawn Seamless Pipe

China Manufacturer of Precision Cold Drawn Seamless Pipe
Steel material: St35 St45 St52 E195,E235,E255,E355
BK, BKS,NBK GBK

2013-12-17

Precision Cold Drawn Seamless Tube

St35

St35 NBK material Precision Cold Drawn Seamless Tube
1.for automobile industry
2.made in china
3.100% Test
4.min. size 3*0.5

2013-12-17

precision Carbon Steel Tube

1. high precision(+/-0.05mm both on OD and ID),
2. good surface(Ra<1.0um)
3. No crack after flaring and flattening Steel Tube

2013-12-17

seamless tubes for hydraulic equipment

1.bright annealed seamless tubes
2.WT:0.5-9mm OD:4-80mm
3.Precision (+/-0.05mm On OD and ID)
4.Suface (Ra<1.0um).

2013-12-17

Cold Drawn Seamless hydraulic Tube

1. EN10305-4
2. cold, annealing, stress relieving, normalizing
3. E235,E255,E355
Cold Drawn Seamless hydraulic Tube

2013-12-17

DIN2391 Cold Drawn Steel Tube St52 NBK

50*1.5*6000mm

OD50+/-0.15mm
WT1.5+/-0.08mm
No crack after flaring and flattening
St52.4+N Cold Drawn and BA Seamless Tube

2013-07-04

St37.4 NBK Seamless BA Precision Tube

6*1*6000mm

OD&ID tolerance +/-0.03mm
No crack after flaring and flattening
ID Ra<0.8um
St37.4+N Cold Drawn and BA Seamless Tube

2013-07-01